XGZ exterior wall latex paint brands

2.Main function : Effectively protect the surface of constructions from erosion, Keeping the building color , beautify the living environment.

3.Application: This paint is suitable for the properly treated exterior surface of new or old building . Suitable for exterior wall decoration of business-living building , hotel and villa etc .

4.Surface appearance: Matt or gloss

5.Color : Mostly it`s white , but color can be chosen according to your need.

6.Features:

1)Environmentally friendly, non-toxic and odorless.

2)Excellent weatherability , excellent color retention . effectively protect wall from atmosphere erosion

3)good stain resistance

4)strong coverage rate , Hydrophobic and air permeability ,Protect from rain water erosion.

5)Protect concrete building

6)Easy construction , Easy to repair

7)Matt or gloss , multicolor can be chosen according to your need.

8)Excellent adhesion and scrub resistant , no shell and no peel off

7.Packing :25 kg/barrel

Pallet with Wooden Crates and Plastic Shrink Wrapping.

Each one cover 18 barrels

8.Storage time :18 month

9.Technical reference:

1)Surface appearance: normal

2)Color : Mostly it`s white ,multicolor can be chosen according to your need.

3)Solid content : 52-54% (Matt type)

4)Density : 1.42-1.44 kg/l(Matt type)

5) Contrast ration :>0.94

6)Washability : >5000 times

7)Alkali resistance : 48 hours Without exception

8)Water resistance : 96 hours Without exception

9)stain resistance: 7 (Matt type)

10)Aging resistant (400H) : powder < 0 grade , change color< 0 grade.

11)Main composition : Acrylic polymer

12)Flash point : null

10.Construction guide:

1)Construction Methods: roll-coating , spraying , brushing

2)Amount of consumables:0.06-0.08kg/m2(For reference only . In actual situations , it varies with the specific substrate surface and construction methods.)

3)Dilution requirements: Without dilution generally .When it is in bad weather or difficult to construct . Please add water scale less than 10 %, and mix it up .

4)Drying time : the time of surface drying is about 30 minutes . After 2 hours of recoating .

5)Notes : The best environment is the temperature between 5 degrees and 35 degrees, and the humidity is below 65%. Stop construct in rain , strong windy .foggy day.

6)Substrate requirements : Dry. clean. solid and high bearing capacity

7)Cleaning of tools: Using water cleaning tools immediately , as far as possible with the detergent.

8)Storage requirement : Should maintain clean, ventilation, cool, dry, avoid direct sunlight, ambient temperature 0-40 Centigrade , not frozen, sealed storage.