Good appearance and fast construction steel structure warehouse

Steel structure workshop

The total area of steel structure workshop project is 5930 square meters with 8 pieces(2 tons) overhead crane.

The  steel structure workshop project was built in the year 2009 in Canuelas,Buenos Aires,Argentina,and it is working well now.

Light steel structure workshop project is made of light weight steel structure in Argentina

Size of steel workshop:5930 m2

Main steel workshop area: 80m*60m*9m eaves height(ridge height 10m)

Affiliated steel workshop area:1130 square meter

Wall and roof material:V-960 light steel sandwich panel

Thermal insulation:50mm EPS foam ,12kg/m3

Wind load:0.79kn/m2

Crane:8 cranes(lifting capacity 2ton)

Window and door:electrical rolling window and door,aluminum alloy

Steel structure Industrial building-Heavy steel frame structure construction project workshop

Structure form:workshop adopts steel structure ,office building adopts reinforced concrete frame structure

Wall:200mm concrete hollow block below 1.2 meter,corrugated steel sheet above 1.2meter,and exterior wall adopts VYX28-205-820+0.6mm galvalume corrugated steel sheet,aluminized zinc content ≥150g/m2,minimum yield strength 550Mpa;wall damp-proof course with indoor under 600mm;the cement mortar mixed 5% waterproofing agent

Roof:roof of workshop project adopts V-SX-III-600+0.6mm sea blue corrugated steel sheet with 100mm glass wool insulation and WR8 white polypropylene veneer:roof of office building is made of concrete with 40mm C20 fine aggregate concrete 

Window;common transparent glass aluminum alloy window and insulating glass aluminum alloy window

Door:bidirectional swing door

Other:cranes,fire-fighting hydrant,lighting,washing room,tea room,turbine ventilator,stairs,railing and so on

Products details:

1.Main Steel Frame Part: welded H steel,Q345B or Q235B materials,spray paint or galvanized.

2.Purlin:C section steel.

3.Roof panel:fiberglass sandwich panel.

4.Wall: corrugated sandwith panel .

5.Tie bar :Q345B round tube 

6.Brace :round steel.

7.Lateral and column bracing :round steel.

8.Knee brace :hot-rolled angel steel.

9.Trims,flashing:color steel sheet.

10.Gutter:color steel sheet.

11.Downpipe:PVC.

12.Door:sandwich panel door.

13.window:Aluminium window(sigle glass ).

Mareiral

H section

We are steel structure manufacturer supply the complete steel structure building materials,such as welded H steel beam,hot rolled H steel beam,tapered H section steel beam.

We put much fund in introducing advanced production lines of sandwich panels, corrugated steel sheets,H section steel, C/Z section steel,EPS foam board and EPS packing machines.

C Section

This C section steel profile used for roof and wall purline for support the roof and wall cladding.All of our purlins and girts are cold-extruded using high-strength steel to minimize weight while maximizing capacity of each section.In addition to cut-to-length, punching and painting services, we are pleased to offer you a complete solution. This value-added service will save you money by reducing your shipping and handling costs.

Roof panel

These panels are featured as easy installation, high strength and beautiful, and they are widely used as the wall and roof of factory, warehouse, garage, exhibition center and cinema etc. 
Features of Corrugated Steel Sheet: 
1. Usage: Roof & Wall 
2.Thickness: 0.3mm-0.6mm 
3. Color: Red, Blue, White, Grey, Green or as client’s requirements 
4. Productivity: 8 production lines totally, 500 million meters per year at least

5.The requirements for window and door;

6.Max height and weight for crane to lift;

Crane

Packaging(we use steel pallet for packing )

Advantages:

1.Fast construction ,easy installation,stable structure,earthquake proofing,energy conserving and environment protection.

2.We offer designing service.

3.we can provide the service of installation,we have our own abroad guiding installation team .

4.Design according to customers’requirements.

Kindly provide the following importance technical parameters for quotation please
(1)  Building size : length * width *height ;
(2)  Wind speed (max speed);
(3)  Snow load (kg/m2 in max situation);
(4)  Earth quake grade (if have) ; 
(5)  Live load and dead load for roof and flooring(special for mutli-floors building);
(6)  The requirements for window and door;

(7)  Max height and weight for crane to lift;

About us

Product range

Steel structure building,steel workshop and warehouse,container house,prefabricated house etc.

Exporting countries:

Our products have been exported to more than 60 countries and regions,such as Canada,Australia,Brazil,Germany,New zealand ,Russia ,Panama,US etc.

Corporate Strength :

Registered capital: USD 5 Million

Employees Total: More than 600

Designers  Total: More than 40

Factory Size:5 factories, total area more than 145000 Square meters

Product Description:

Standard: GB, ISO9001: 2008,European,ASTM,BS.

Certificate: SGS,BV,CE

Terms:

Payment: T/T or by L/C(30% prepaid as deposit, the balance 70% before shipment)

Delivery time: 15~40 days, usually as customer’s order

Shipment: 20’GP, 40’GP, 40’HQ, 40’OT or in bulk